About theshelvesand bins.
Not all features are on all models.
Rearranging the Shelves
Shelves in tbe refrigerator and freezer compartments are adjustable.
Refrigerator Compartment
Toremove:
O Tilt tile shelf up at tile front.
Lift tile shelf up at tile back and
bring the shelf out.
Somemodels have wire shelves that
can be adjusted in the same manne_
Toreplace:
While tilfin g tile shelf u p, insert, tile top
hook at rile back oftbe shelf in a slot
on tile n'ack.
Lower tbe front of the shelf until the
bottom of rile shelf locks into place.
Freezer Compartment
Toremove:
0 Lift up tbe left side of the shelf and
slide it left into tbe center of the shelf
supports.
Rotate the right side of tbe shelf up and
out of tbe shelf supports.
Toreplace:
Holding tbe shelf diagonally, insert the
left end of tile shelf into the center of
tbe shelf supports on the side wall at tbe
desired level.
Insert the right end of the shelf into rile
shelf supports at tim same level. Rest
each end oftbe shelf on tile bottom of
tile shelf supports.
NOTE:Formodelswithanautomaticicemaker,
thefreezershelfmustbein thelowerposition
fortheicecubebucketto catchthecubes.
, "--"'- "opmpromShelves (onsome
models)
Spillproof shelves have special edges to
help prevent spills from dripping to lower
shelves. To remove or replace tbe shelves,
see Rearranging the Shelves.
6
To Next Page
Loading...
