D
IRECTION 5813707-100, REVISION 2 VENUE GO™ SERVICE MANUAL
Chapter 3 - System Setup 3-53
PRELIMINARY
NOTE: This check uses both Ping and DICOM Ping. Ping is used to verify the TCP/IP connection to the server.
DICOM Ping is used to verify that the DICOM application is answering.
1) Select DicomQR from the Selected devices list.
2) Select Check.
3-8-6-3-1 If Retrieve is failing …
If Retrieve is failing, but Query is functioning, verify if the scanner has been registered as a receiver on
the server.
To Next Page
Loading...
