D
IRECTION 5813707-100, REVISION 2 VENUE™ SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-57
PRELIMINARY
6.) Remove cart’s cables plastic cover.
7.) Locate the printer USB cable, and gently pull the cable upwards through the pole routing.
8-2-23-5
Printer USB Cable Installation Procedure
1) Route the printer USB cable through the cart pole.
2.) Reconnect the USB to the printer.
3.) Close the pole cables plastic cover.
4.) Re-mount the system.
Figure 8-138 Remove Cable Plastic Cover
Figure 8-139 Pull Printer USB cable upwards through the pole
• Mounting System on Cart
To Next Page
Loading...
