Cleaning and care
9-7
Figure 9-1 Emptying the water trap container
To remove the water trap, push the trigger above the water trap. The water trap is spring-
loaded. The message ‘Check D-fend’ is displayed.
• Detach the container from the water trap cartridge by pulling it carefully downward.
• Empty and clean the container.
• Attach the container tightly back into the cartridge.
• Push the whole unit into its housing on the front panel until the latch is set.
• Press the Normal Screen key to restart monitoring. Check that the message ‘Check D-
fend’ disappears.
Other accessories
See the accessory package for instructions for how to clean and check them. Do not reuse
single-use disposable accessories.
To Next Page
Loading...
