GFK-2571A 2-1
Installation
This chapter provides instructions for installing PACSystems RX3i PROFINET Controller modules.
▪ Pre-Installation check
▪ Removing the backplane knockout
▪ Module installation and removal
▪ Hot insertion and removal
▪ Port connections
▪ Installing SFP devices
▪ LED indications
▪ Installing the USB Port Driver
▪ Firmware updates
▪ Time synchronization with RX3i CPU
For additional information about system installation, also see the PACSystems RX3i Systems
Manual, catalog number GFK-2314.
To Next Page
Loading...
