GFK-2571A Chapter 3 Configuration 3-25
Configuring Sub-Modules of a Third-Party IO-Device
To configure the sub-modules of a third-party IO-Device, expand it in the Navigator. For example:
This example device is a switch. The parameters of its ports can be viewed and edited by either
double-clicking on a port, or selecting a port then right-clicking and selecting Configure from the
menu.
For this example IO-Device, the port parameters appear for editing.
Sub-Module Parameters (GSDML Tab)
The GSDML tab displays the device’s GSDML parameters, which cannot be edited.
To Next Page
Loading...
