4 European Process Order Select
Several components like cables, stationary rails, etc. are length selectable. This selection should
reflect the particularities encountered by an Installation Specialist on Site.
All cable and component selections must be sent at least 6 weeks before RSDD to your PMC. The
selection tool is available on the website:
http://gein.euro.med.ge.com/european_installations/
Innova 2100-IQ, 3100/3100-IQ, 4100/4100-IQ Cardiovascular Imaging System Pre-Installation Manual
GE Healthcare Direction 5160944-13-1EN, Revision 2
248 4 European Process Order Select
To Next Page
Loading...
