Table 2-11: D distance
ANGIO CARDIO NEURO
Omega IV Compact NA 1395 mm (54.9 in) NA
Omega V Long 1278 mm (50.3 in) 1395 mm (54.9 in) 1395 mm (54,9 in)
Omega V non motorized Long 1278 mm (50.3 in) 1395 mm (54.9 in) 1395 mm (54,9 in)
Tilting table 1278 mm (50.3 in) 1395 mm (54.9 in) 1595 mm (62.8 in)
3.3.3 Gantry and Omega table/Tilting table Floor Preparation Kits (GEMS supplied)
Illustration 2-81:
All GE supplied vascular system floor preparation are contained in catalog. There are some
additional gantry/table mounting kits based on each mounting method: through bolts or floor
anchors.
NOTICE
The table base plate is recommended if a future Omega to Tilting table upgrade
is to be considered.
•
Base plate assembly (mandatory) 2285048 - Refer to Table 2-12
•
Tilting table Add–On Kit 2360538 - (refer to Table 2-13) (Floor base plate assembly 2285632
shall be ordered).
•
If there is no integrated base plate plan (2359194) delivered with S18101SG, please refer to
drawings 2359194 (Angio and Cardio configuration Illustration 2-82) Please order locally the
integrated base plate based on this plan.
Innova
TM
IGS 520, Innova
TM
IGS 530, Innova
TM
IGS 540 Pre-Installation Manual
Direction 5499972-1-1EN, Revision 2
Chapter 2 Equipment Requirements 149
To Next Page
Loading...