GE Innova IGS 520 - Page 161

Illustration 2-83: SPECIFICATIONS FOR A TYPICAL 17’-10” (5.44 M) INBOARD
STATIONARY RAIL MOUNTING INTERFACE (BOTH RAILS CEILING MOUNTED), FOR
MAVIG SUSPENSION
Table 2-22: Stationary rail in different length
Rail length mm (ft)
A C D INBOARD RAILS
4,724 (15’6”) 7*660.4=4,623 51 B0186JA
5,639 (18’6”) 8*660.4=5,283 254 51 B0222JA
5,791 (19’) 8*660.4=5,283 406 51 B0228JA
Innova
TM
IGS 520, Innova
TM
IGS 530, Innova
TM
IGS 540 Pre-Installation Manual
Direction 5499972-1-1EN, Revision 2
Chapter 2 Equipment Requirements 161