3.3.3.1 2285048 - Base Plate Assembly
Table 2-12:
Item Name Part # Description Quan. Notes
Base plate 2285059 12 Hole Floor Base plate 1 pc
Lift Plate 2290939 Lifting Straps 2 pc
Hex Head
Screw
5166535 Hex Head Screw 1/2”-13UNC L1
1/2” 12.9 Black
2 pc
Grease 2295599 Lithium grease lubricant 100g 2 pc
Doc 2230112-1-100 Vascular Gantry Base plate and
Table
1 pc
Doc 2229297-100 LCA/LCV+/LC+ System Base
plate and Omega IV/V/EP Table
Floor Preparation
1 pc
Doc 2290880-2-100 Innova Pre-Installation Kit Install
Procedure
1 pc
NOTE:
The 12 LC base plate mounting screws are delivered with the system's LC Gantry.
These screws are:
•
cap screws 5166774; Screw Socket Head Cap 1/2”-20 UNF L1 1/2” 12.9 Black
(used when installing new system on old base plate (US threads))
•
cap screws 2300939; Hex Head Cap screw; M12 40/40 Class 12.9 Black ; used to
attach L-brackets on table shipping pallet to positioner dolly for table positioning
(used when the new base plate is metric threads)
Innova
TM
IGS 520, Innova
TM
IGS 530, Innova
TM
IGS 540 Pre-Installation Manual
Direction 5499972-1-1EN, Revision 2
Chapter 2 Equipment Requirements 151
To Next Page
Loading...