2.2 MIS (Master Interconnect System)
Innova system interconnect cables are described in MIS (Master Interconnect System)
documents. These documents specify all interconnections between components within the
system.
Reference: For specific Vascular system interconnect maps and connection details, refer to the
following
•
System MIS Map
•
System MIS Charts
General Guidelines
Innova System introduce a new system interconnect with a star distribution for all cables from
the technical area. The cables are shipped on spools to create cable groups. Cable group 1 for
Exam room and cable group 2 for control room. The cable group shall be put in place during the
same action. The cables are routed in the same duct.
The HV cables could be pulled separately.
Innova
TM
IGS 520, Innova
TM
IGS 530, Innova
TM
IGS 540 Pre-Installation Manual
Direction 5499972-1-1EN, Revision 2
Chapter 5 Electrical Requirements 221
To Next Page
Loading...