GE Innova IGS 540 - 3.3 Door Size Requirements; 3.3.1 Door Height; 3.3.2 Door Width

3.3 Door Size Requirements
Minimum door sizes also apply to hallways and elevators. For additional details, refer to
Shipping Information.
3.3.1 Door Height
The minimum door height (to accommodate Innova positioner on its dolly) is 1.980 m (78 in). If
the height is limited to 2 m (79 in), you will need a fall over cabinet.
3.3.2 Door Width
The minimum door width needed (to accommodate the Innova LC shipping dolly) is:
•
1.165 m (46 in) with protective side rail,
•
1.096 m (43 in) with one protective side rail removed on site.
NOTE: Door widths are based on a
straight–in approach requiring a 2.44 m (96 in) wide
corridor. Calculations need to be made for accommodation of equipment through
narrower corridors.
Innova
TM
IGS 520, Innova
TM
IGS 530, Innova
TM
IGS 540 Pre-Installation Manual
Direction 5499972-1-1EN, Revision 2
Chapter 1 General Requirements 39