GE Innova IGS 6 - Mounting Requirements

Figure 2-51 Cable Curvature with “On Grade” anchor kits
NOTE
In case of on grade cabling, because of the minimum curvature constraint of 150 mm (6”),
the cable will have to come from the side between Innova Frontal/Lateral Positioner and
patient table.
2.3.2 Mounting Requirements
Floor Loading and Recommended Mounting Methods
See Table 2-14 on page 93. To obtain floor loading and recommended mounting methods for
components not specified in Table 2-14 on page 93, refer to the appropriate component Pre-
Installation Manual listed in 2.1.5 System Compatibility on page 71.
Equipment Requirements
92
Innova
TM
IGS 6
5750182-1EN 3