Substructure for Dual Arm suspension
Figure 1-14 Shipment of Substructure for Dual Arm suspension
Other Elements Package
NOTE
All OEM parts are shipped inside there original boxes group as needed on pallets.
Figure 1-15 Other Standard Shipping Box
1.3.2 Tools and Test Equipment
Refer to Table 1-2 on page 21. To obtain a list of tools and test equipment for components not
specified in Table 1-2 on page 21, refer to the appropriate component Pre-Installation Manual listed in
2.1.5 System Compatibility on page 71.
General Requirements
20
Innova
TM
IGS 6
5750182-1EN 3
To Next Page
Loading...