GE Innova IGS 6 - Page 32

Table 1-2
PRODUCT OR COM-
PONENT
TOOL OR TEST
EQUIPMENT
USED FOR SOURCE RECEIVED (DATE)
Frontal Positioner Service Engineer's
Tool Case
General Use
Level, Protractor
Type
Positioner Checks
Torque Wrench 2 to
20 daN.m (15 ft. lbs.
to 150 ft. lbs.)
Positioner Checks
1/2 inch Ratchet
Wrench (2)
Raise and Lower Po-
sitioner shipping
dolly
InGrid/HV Tank
"Chucking tool" or
wrench, P/N
2131328
High Voltage Cable
Installation
Laptop Computer
(MS-DOS Windows)
Positioner Configu-
ration and Calibra-
tion
Lateral Positioner Ladders Installation
Lateral Positioner
Toolcase (shipped
with Lateral Posi-
tioner)
(For USA and Japan)
The toolcase must
be ordered from
Service Tool Pool
Installation
5-axis Laser Align-
ment tool (shipped
with Lateral Posi-
tioner Toolcase)
Installation
Service Engineer's
Tool Case
General Use
Level, Protractor
Type
Positioner Checks
InGrid/HV Tank
"Chucking tool" or
wrench, P/N
2131328
High Voltage Cable
Installation
General Requirements
5750182-1EN 3
Innova
TM
IGS 6
21