continued
PRODUCT OR COM-
PONENT
TOOL OR TEST
EQUIPMENT
USED FOR SOURCE RECEIVED (DATE)
Torque Wrench 2 to
20 daN.m (15 ft. lbs.
to 150 ft. lb)
Positioner Checks
Omega Table Same as for Frontal Positioner (Service Engineer's Tool Case)
C2 Cabinet (Frontal
and Lateral)
Same as for Frontal Positioner (Service Engineer's Tool Case)
C1-Frt and C1-Lat
Cabinets
Same as for Frontal Positioner (Service Engineer's Tool Case)
Same as for Frontal Positioner (Service Engineer's Tool Case)
DL User parts
Monitor Suspension Ladders Installation
(For Suspension
with rails) XT Lifting
Tool (x2)
46-156940G3
Installation
(For LDM Suspen-
sion with fixed
point Dual Arm) In-
stallation tool and
Peli case (P/N
5758418)
Installation
Chiller Phillips/Flathead
screwdriver
Open chiller. Install
wiring and hoses
Chiller Autotrans-
former (Coolix 4100)
Phillips/Flathead
screwdriver
Open chiller auto-
transformer. Install
wiring and hoses
Large Display Moni-
tor (Option)
Large Display Moni-
tor Lifting Tool
Raise Large Display
Monitor for installa-
tion on Mavig sus-
pension
General Requirements
22
Innova
TM
IGS 6
5750182-1EN 3
To Next Page
Loading...