GE JV320 - Advanced Troubleshooting and Service; Motor and Fan Cleaning; Lamp Replacement Guidelines; Troubleshooting Fan Operations

--
—
-i-a cuELAfN MaTaR AND FAN:
1. DISCfiNTNECTPOWER AT MAIN FUSEBOX.
‘2.Removefilters.
3. Wipe ffin bladeand motor with cloth, dampenedonly in ammoniaand warmwater
solution.
4. Replace filters.
5. Conmx%powerat mainfuse.
ILAM%= REPLACEMENT:
Your hoociis equippedwith an ordinaryscrewbaselampholder.The lampis not sup-
plied.If the lampshould fail,unscrewthe lampand replace.DO NOT USE MORE
THAN A 60 WATT LAMP IN THIS HOOD.
Do notcontacta warmor hot lampwitha moistclothor hand.It maybreakthe lamp.
Alwaysletlampscool beforereplacingor cleaningaroundthem.
H Trouble It3welaps:
If thefandoesnot operatewhenthefanswitchis “ON,” checkthemainfuseor circuit
breaker.
If thefanoperates,butslowerthannormal,themotormayneedoiling.CallyourGeneral
Electricserviceman.
If the fankeepsgoingoff andon, checkto be surethatthemetalgreasefilteris clean.
If thefanshouldcontinuecyclingoff andon,callyourGeneralElectricserviceman.
When Y?3u Call
forProduct Service:
To helpthemgiveyou fasterservice:
1. Give the completemodel numberof your hood (such as JV320 01 WH) whichis
stampedon thehoodratingplate.RATING PLATE islocatedon backwallof hood
body.
2. Givean accuratedescriptionof the trouble.
NO1’E:When serviceis required,be sure to specifygenuineGeneralElectricrenewal
parts.
RANGE MARKETING OPERATION
GENERAL ELECTRIC COMPANY
Appliance Park, Louisville, Kentucky 40225