Need help?Do you have a question about the GE JVM1790SK - Profile 1.7 cu. Ft. Convection Microwave and is the answer not in the manual?
General| Capacity | 1.7 cu. ft. |
|---|---|
| Type | Convection Microwave |
| Power Output | 1000 Watts |
| Control Type | Electronic Touch |
| Interior Material | Stainless Steel |
| Turntable | Yes |
| Convection | Yes |
| Over-the-Range | Yes |
| Cooking Modes | Microwave, Convection, Combination |
| Color | Stainless Steel |
| Pre-Programmed Settings | Yes |
| Child Lock | Yes |
| Warranty | 1 Year Limited |
| Dimensions (W x H x D) | 29.88 x 16.5 x 15.75 inches |
| Exterior Dimensions | 29.88 x 16.5 x 15.75 inches |
Guidelines to prevent exposure to microwave energy during servicing.
Lists technical specifications like power, frequency, voltage, and dimensions.
Instructions for proper setup and placement of the appliance.
Importance and procedure for grounding the microwave for safety.
Diagram showing the arrangement of buttons on the control panel.
Explains the function of each button on the control panel.
A detailed schematic showing the interconnections of major components.
Shows the mapping of touch keys to circuit connections.
Advice on safe and proper operation to maintain the appliance.
Steps to verify proper function after installation or repair.
Procedure to test microwave output power using a water load.
Critical warnings and general safety measures before starting repairs.
Method for measuring microwave radiation leakage.
Step-by-step guide to remove the main circuit board assembly.
Instructions for safely detaching the microwave from its wall mount.
Procedure for taking off the external housing of the microwave.
Steps to safely detach and remove the magnetron component.
Explanation of the door lock system for safety.
Steps to align door latches and interlock switches correctly.
Procedure to check the continuity of the primary interlock switch.
Procedure to check the continuity of the secondary interlock switch.
Procedure to check the continuity of the interlock monitor switch.
Resistance tests for magnetron and high-voltage transformer.
Testing procedures for high-voltage capacitor and diode continuity.
Troubleshooting common causes of fuse blowing.
Diagnosing issues with power supply and display window.
Troubleshooting start function failures and no heating issues.
Illustrated breakdown of the microwave door components.
Illustrated breakdown of the control panel and its components.
Illustrated breakdown of internal oven cavity components.
Illustrated breakdown of parts related to installation.
Detailed schematic showing the layout and connections of the PCB.
Visual guide indicating solder points and component placement on the PCB.
To Next Page
