GE Kelman DGA 900 Plus - A.2 GE Field Service Engineer (FSE)-supplied items

MA-041 – DGA 900 Plus - Installation & Commissioning Manual - Rev 1.1 4-Mar-22 Page 97 of 99
Qty
Description
6 of each
(N x8)
Cable markers P, S, N, 1, 2, 3 and 4
1
NYOGEL 753G (electrically conductive grease)
1
Thermal jointing compound (Wakefield Engineering, 120 series) (GE P/N:
CONS01026)
1
Ethernet cable Ferrite (Würth 7427 154) when optional copper Ethernet
module is ordered (GE P/N: ELEC04004)
A.2 GE Field Service Engineer (FSE)-supplied items
If GE performs the installation, the GE FSE will bring the following items:
Table A-2: GE FSE-supplied items
Qty
Description
1
Handheld multimeter 4½ digit with:
▪ Testing continuity capability
▪ AC voltage measurement (0.5%)
▪ Resistance measurement (0.5%)
(Suggested model: Fluke 87 or 287 or equivalent).
>
Required material as described in ‘Section 9.8 - Bushing Adaptor Circuit
Integrity Test Record’.
1
27 mm socket to fit ½ in. square drive torque wrench
1
½ in. square drive torque wrench with a range of 10 - 100 Nm (7 – 73 lb ft)
1
1.25 N m torque screwdriver
1
3 mm ball hex blade for torque screwdriver
1
Ratchet crimp tool.