Quick Start 27
LOGIQ
t
200PRO Series Quick Start
2234974–100 Rev. 0
Recording Images
Image Memory
Press Image Memory to temporarily store the maximum of 10 images in system memory.
Pressing Image Memory after the warning deletes the oldest image in system memory and saves
the current displayed image.
Press Image Recall to display the last image stored in system memory.
Use Trackball or Ellipse key to select the desired image to recall.
After recall, comments, measurements and body patterns can be added to the image. The image is
then available for printing and archiving to MOD(option).
Printing
Use the Record1 or Record2 keys to print the image/report page a B/W Video Page Printer.
The function of these keys was established during installation.
Image Memory
Image Recall
Record1
Record2
To Next Page
Loading...
Need help?
General
