To Next PageTo Next Page
Need help?Do you have a question about the GE MDS 4790 Series and is the answer not in the manual?
General| Data Rate | Up to 115.2 kbps |
|---|---|
| Frequency Range | 902-928 MHz |
| Channel Spacing | 12.5 kHz, 25 kHz |
| Power Output | Up to 1 Watt |
| Operating Voltage | +10 to +30 VDC |
| Operating Temperature | -40°C to +70°C |
| Interface | RS-232 |
Enables remote diagnostics and data collection across the network.
Explains configurations with one or two transceiver boards for reliability.
Details uses in MAS and SCADA systems, including MAS network types.
Highlights reliability, one-piece transceiver board, and optional redundancy.
Lists optional accessories for expanding radio functionality and integration.
Explains how to interpret the radio's hardware and software configuration.
Outlines essential requirements for radio installation: power, antenna, and interface.
Guides selection of appropriate antennas and low-loss feedlines for optimal performance.
Instructions for checking shipment contents and inspecting for damage upon receipt.
Provides guidance on installing the radio in rack or tabletop configurations.
Details options for connecting AC and DC power sources to the radio unit.
Explains the installation and function of the internal backup battery for power continuity.
Covers proper installation of antennas, placement, and feedline connection.
Details connections for power, data, alarm, and orderwire ports on the rear panel.
Verifies connections, voltage, and antenna heading before initial power-up.
Steps for powering on the radio and initial system indications.
Explains the meaning and function of front panel LEDs for status monitoring.
Guides on connecting a PC to the radio for configuration, control, and diagnostics.
Provides an overview of PC commands for radio operation, diagnostics, and information.
Provides in-depth explanations of specific commands for radio configuration and monitoring.
Explains how to use the front panel controls to configure radio parameters.
Details the various screens accessible via the front panel display.
Instructions for removing and installing transceiver boards and power supply modules.
Steps for installing and removing the internal backup battery.
Procedures for removing and re-installing the radio's front panel.
Discusses factors affecting performance when changing radio frequencies.
Steps for testing and replacing the internal duplexer.
Procedures to test the antenna switch module and identify potential replacement needs.
Guidance on inspecting and cleaning cooling fans for proper operation.
Information on how to download the latest software code from the vendor's website.
Steps to prepare software files for radio upgrades, including saving and locating files.
Detailed steps for performing the software download process to the radio.
Lists detailed technical specifications for the radio models.
Discusses factors affecting radio wave propagation for link design.
Provides formulas to assist in determining system installation parameters.
A chart for converting RF power measurements between dBm, volts, and watts.
Contact information and details for technical support assistance with GE MDS products.
Guidelines for returning equipment for factory repair, including SRO procedures.
