ZKT36 Trim Kit
3/4 " Custom Propels
OPTION 1
For non-dispenser
model
or dispenser model
using custom
collar trim
Step 1
Remove
handles & trim
• Open door to 90°.
• Remove the Phillips head screws from the full-length
handles.
• Open the doors fully to stop.
• Remove the screws from the aluminum trim, top,
bottom and hinge side.
• Retain screws. Discard original trim.
Note: If a customcollar isto
be used,order ZWCD1trim kit.
Ifa customhandleis to be used,
order ZKHT1trim kit.
Important: When thebottom
trim piece is removed,an
aluminumshim securedto tile
bottom of thedoorcan beseen,
Donot attempt to removethis
piece,
Step 2
Install
3/4" trim
• Attach the new 3/4"trim pieces on the top, hinge side
and bottom using original screws.
Freezer
36" Models
FreshFood
28
To Next Page
Loading...
