GE Multilin G100 - D.20 Peripheral Types and Compatibility

G100 Instruction Manual
GE Information
994-0155-1.00-1
43
D.20 Peripheral Types
D.20 Peripheral I/O modules are intelligent modules containing an on-board microprocessor. They are
configured as slaves to the G100. In this way, specific I/O processing is distributed throughout the to the
appropriate I/O module.
There are four types of I/O peripherals supported by the D.20 HDLC PCIe:
• D20A analog input
• D20S digital inputs
• D20K digital output
• D20C combination input/output
Optional high-voltage peripherals are also available.
Redundant D.20 communication channels are available on all peripherals. To utilize this function redundant
D.20 LAN cards are required to be installed on the D.20 Peripheral I/O modules. D.20 A, S and K Peripheral I/O
modules require 540-0207 and D.20 C requires 540-0209.
The D.20 HDLC PCIe card is only compatible with CCU BASE and PCOMMON v3.00 or higher.
Refer to Peripheral Compatibility with the D.20 HDLC PCIe card section in this manual for complete
list of D.20 Peripheral I/O compatibility.
For further information on I/O peripherals, see the D20/D200 Installation and Operations Guide (part number
994-0078); see section: Connections and Configuration.
Peripheral compatibility with the D.20 HDLC PCIe card
Use the tables in this section to check compatibility with existing D.20 Peripheral I/O modules and devices.
Table 10: D20A Analog Input Module Compatibility
Component GE Item # Description
Compatible
release
Date of
release
WESDAC 511-0101 WESDAC D20A TYPE 1 VERSION 1 REL 21-higher April 1998