58 994-0155-1.00-1 GE Information
The interface is DisplayPort
TM
Version 1.2 and DP++ compliant which is used mainly to enable installation
personnel to connect a display for the initial configuration of the device, or a Local Runtime HMI display.
Multi Stream Transport (MST) for multiple attached displays is not supported.
The DisplayPort
TM
is fused internally. For normal operation don’t exceed 0.5 A.
Users are recommended to use passive DP++ to HDMI and passive DP++ to DVI-D. Use of active adapters is not
encouraged as they limit higher frequency refresh rates, and limit display sizes.
G100 doesn't support Touch Screen Panel controls due to the absence of external vendor USB
drivers. It’s recommended to use a Windows Panel PC and the Remote HMI application instead.
To Next Page
Loading...
