GE Multilin G100 - Chapter 5: Specifications; G100 System and Communications Specifications

G100 Instruction Manual
GE Information
994-0155-1.00-1
61
Specifications
G100 Product Specifications
System
Processor
Intel Atom X5-E3930 1.3GHz Processor
Memory
8GB SoDIMM 204 pin DDR3L (up to 1866MHz)
Storage
16GB mSATA SSD
Real Time Clock (RTC) When powered off, the real-time clock remains active for 5 days
Operating system
Predix Edge OS (Kernel 4.14)
LED indicators Power indicator, CPU Status indicator, IRIG-B Input indicators, 2x SFP
Ethernet port indicators, 2x TP Ethernet port indicators, 4X Serial port
indicators, 8x DI channel indicator, 4x DO channel indicator, AI sampling
indicator
Communications
Ethernet connections 2 RJ45 Ethernet ports + 2 SFP modules
1000BASE-LX 850nm 5km (LC fiber single-mode)
100BASE-FX 1300nm 2km (LC fiber single-mode)
100BASE-FX 1300nm 15km (LC fiber single-mode)
100/1000BASE-TX (RJ45 copper medium, Cat-5 or better)
100BASE-FX (LC fiber multimode)
1000BASE-SX (LC fiber multimode)
Serial communications 4x serial interfaces accessible via individual RJ45 connectors
Serial interfaces use 16550 compatible UART.
Support baud rates 300, 600, 1200, 2400, 4800, 9600, ... 921k.
Software controlled mode of operation between RS232 or RS485 2-wire.
Software controlled termination resistor (120 ohm) for RS485 mode
(termination is not active while powered off).
All software selection persist when power cycled.
IRIG-B available on all serial interfaces.