GE MultiLink ML1600 User Manual

CHAPTER 16: SNMP SNMP
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 16–11
The following window illustrates changes to the SNMP community parameters. It is
recommended to change the community strings from the default values of public and
private to other values.
Z When done changing the community strings, click OK.
Multiple managers can be added as shown below.
Z When adding SNMP manager stations, click on the Add button on
the SNMP menu screen.
Z Make sure that each station can be pinged from the switch by
using the Configuration > Ping menu.
Z When done adding stations, click OK.
Z When adding SNMP trap receivers, click on the Add button on the
SNMP menu screen.
Z Make sure that each station can be pinged from the switch by
using the Administration > Ping menu.
Z Determine which sorts of traps each station will receive, as shown
above. If not sure, select all three types.

GE MultiLink ML1600 Specifications

General

Brand	GE
Model	MultiLink ML1600
Category	Switch
Language	English