Chapter 8: System Hardware Overview
5495975-1EN Rev.9 8-37
© 2013-2017 General Electric Company. All rights reserved.
Tilt
The Digital wallstand receptor can be tilted at any angle within the range of 90 ° (horizontal) to -20°
(Figure 8-23). Detents for the receptor tilt are located at 0° (horizontal) and 90° (vertical). Lateral detents
on the OTS are active when positioning to the wallstand.
Figure 8-23 Digital Wallstand receptor tilt range
The tilt lock release button is located in the lower corner of the back of the receptor (Figure 8-24).
Figure 8-24 Tilt lock release
90° Horizontal detent
Maximum upward tilt
0° Vertical detent
-20°
Maximum downward
tilt
To Next Page
Loading...
