Chapter 9: Worklist
5495975-1EN Rev.9 9-8
© 2013-2017 General Electric Company. All rights reserved.
The filter screen has several options for accepting or rejecting the information from the Worklist.
Table 9-3 describes the filter screen functions.
Follow this process to filter the Worklist.
Note: The fields may be completed in any order.
1. Click [FILTER LIST] on the Worklist screen.
The Filter Screen appears
2. Select the Show list for option.
3. Select the Include options.
4. Select the Date option.
5. If you selected Range for the Date option, enter or select the From and To dates.
Table 9-3 Filter Acceptance/Rejection Buttons
Function Description
Filter List Filters the Worklist items by system or modality.
This system – procedures entered locally on the unit.
CR modality – procedures for Computed Radiography.
DX modality - procedures for digital x-ray.
All systems – procedures for all modalities.
Include Allows you to include or exclude completed or discontinued exams in the filter.
Date Allows you to select the date of exams to filter by.
All – procedures scheduled for any date
Range - procedures scheduled for a specified range of time
Today – procedures scheduled for the current date
From (mm/dd/yyyy)
To (mm/dd/yyyy)
When the “Range” option is selected for the date, allows you to enter dates or
pick dates from a calendar screen.
Patient Information Allows you to filter based on data from the Patient Information screen.
Available options are:
Last Name
First Name
Accession #
Patient ID
The filter may be restricted by any or all of these fields. Leaving a field blank
means that it will not be included in the filter.
[OK] Applies the filter and returns you to the results on the Worklist.
[CANCEL] Clears the Filter screen and returns you to the Worklist.
To Next Page
Loading...
