Chapter 13: Advanced Applications
5495975-1EN Rev.9 13-13
© 2013-2017 General Electric Company. All rights reserved.
6. Wait for the export to complete.
7. Remove the disk or USB device.
8. Insert a new disk or connect a new USB device.
9. Click [RESET TO LAST EXPORT] to change the From date and time.
10. Repeat steps 3-9 until all data is exported.
11. Click [CLOSE].
Auto Image Paste
Overview
Auto Image Paste is a purchasable advanced application that allows x-ray imaging of patient anatomy,
such as spine and legs, that are larger than the current receptor’s 41cm field of view. Previously, in film or
CR, this was accomplished by the use of a “long” cassette.
Auto Image Paste is available at the Wallstand.
The system acquires 2–8 exposures in sequence then digitally pastes them together to form a single
image.
WARNING All final pasted images should be reviewed by a qualified health care professional
for alignment and measurement accuracy before being used for diagnosis.
Figure 13-9 Illustration of acquisition
Wallstand
To Next Page
Loading...
