GE Optima XR646 - Page 393

Chapter 15: Preferences
5495975-1EN Rev.9 15-18
© 2013-2017 General Electric Company. All rights reserved.
Figure 15-18 Worklist Default Query screen
Table 15-6 Worklist Default Query description
Function Description
Show list for Determines Worklist items by system or modality.
 This system – exams for this unit only
 CR modality – exams for Computed Radiography.
 DX modality – exams for Digital X-ray.
 All systems – exams for all modalities
Include Allows you to include or exclude completed or discontinued exams on the Worklist.
Date Range Selects the date range of scheduled procedures to show on the Worklist.
Available options are:
 All
 Current Day
Plus previous
__ Days __ Hours
Shows procedures that are scheduled for the specified time before the selected
date range.
Note: If the “Days” value is left blank, the worklist query will be based on current
time plus the number of hours entered.
Plus future
__ Days __ Hours
Shows procedures that are scheduled for the specified time after the selected date
range.
Note: If the “Days” value is left blank, the worklist query will be based on current
time minus the number of hours entered.
Auto Refresh
[ON] [OFF]
Turns Auto Refresh on or off. Refer to Auto Refresh
(p. 15-19) for more information.