GE Optima XR646 - Change the DI Display

Chapter 15: Preferences
5495975-1EN Rev.9 15-34
© 2013-2017 General Electric Company. All rights reserved.
Figure 15-32 Deviation Index screen
Change the DI Display
1. On the Detector Index screen, click the DI Display drop-down list to open it.
2. Select the display option.
 Available options are:
3. Click [SAVE] to apply the change and close the screen.
 [CLOSE] closes the screen without saving the changes.
– No Display In this example, there is no DI information displayed
on the Image Viewer screen.
– Numerical In this example, only numerical DI information is dis-
played on the Image Viewer screen.
– Graphical In this example, DI information is displayed is both
numerically and graphically on the Image Viewer
screen. This is the recommended display option.