Chapter 2: Safety and Regulatory
5495975-1EN Rev.9 2-26
© 2013-2017 General Electric Company. All rights reserved.
Hand crushing hazard. This symbol indicates that serious injury to the hand may
occur.
Follow Instructions for use
No stepping or standing on unit. The component on which the symbol appears
cannot support the weight of a person. Damage to equipment or injury may occur if
the unit is stepped or stood upon.
Maximum load. This symbol indicates that the component has a maximum weight
limit. Damage to equipment or injury may occur if the maximum weight is exceeded.
Operating temperature. This symbol indicates that the component must be within a
minimum and maximum temperature range in order to operate. Damage to
equipment may occur if equipment is used at temperatures outside of the specified
range.
Emergency Stop Button. It’s used to immediately power down the system (including
table, OTS, wallstand, and x-ray tube) and stop image exposure.
Reference Number.
Serial Number.
Date of Manufacture.
e-IFU symbol.
The symbol indicates the instruction for use of the device is supplied in electronic
form instead of in paper form.
Table 2-9 Special notices
Symbol Description
To Next Page
Loading...
