GE P54B - Page 598

Appendix B - Settings and Signals
P54A/B/C/E
B32
P54xMED-TM-EN-1
MENU TEXT COL ROW DEFAULT SETTING AVAILABLE OPTIONS
DESCRIPTION
Record Control 09 29 Visible
Invisible
Visible
[Indexed String]
Sets the Record Control menu visible further on in the IED settings menu.
Disturb Recorder 09 2A Visible
Invisible
Visible
[Indexed String]
Sets the Disturbance Recorder menu visible further on in the IED settings menu.
Measure't Setup 09 2B Visible
Invisible
Visible
[Indexed String]
Sets the Measurement Setup menu visible further on in the IED settings menu.
Comms Settings 09 2C Visible
Invisible
Visible
[Indexed String]
Sets the Communications Settings menu visible further on in the IED settings menu. These are the settings associated with the 1st and 2nd
rear communications ports
Commission Tests 09 2D Visible
Invisible
Visible
[Indexed String]
Sets the Commissioning Tests menu visible further on in the IED settings menu.
Setting Values 09 2E Primary
Primary
Secondary
[Indexed String]
This affects all protection settings that are dependent upon CT and VT ratios. All subsequent settings input must be based in terms of this
reference.
Control Inputs 09 2F Visible
Invisible
Visible
[Indexed String]
Activates the Control Input status and operation menu further on in the IED setting menu.
Ctrl I/P Config 09 35 Visible
Invisible
Visible
[Indexed String]
Sets the Control Input Configuration menu visible further on in the IED setting menu.
Ctrl I/P Labels 09 36 Visible
Invisible
Visible
[Indexed String]
Sets the Control Input Labels menu visible further on in the IED setting menu.
Direct Access 09 39 Enabled
Disabled
Enabled
Hotkey Only
CB Ctrl Only
[Indexed String]
Defines what CB control direct access is allowed. The front direct access keys that are used as a short cut function of the menu may be:
Disabled – No function visible on the LCD.
Enabled – All control functions mapped to the Hotkeys and Control Trip/Close are available.
Hotkey Only – Only control functions mapped to the Hotkeys are available on the LCD.
CB Ctrl Only – Only Control Trip/Control Close command will appear on the IED’s LCD.
Function Key 09 50 Visible
Invisible
Visible
[Indexed String]
Sets the Function Key menu visible further on in the IED setting menu.
RP1 Read Only 09 FB Disabled
Disabled
Enabled
[Indexed String]
To enable (activate) or disable (turn off) Read Only Mode of Rear Port 1.
RP2 Read Only 09 FC Disabled
Disabled
Enabled
[Indexed String]
To enable (activate) or disable (turn off) Read Only Mode of Rear Port 2.
NIC Read Only
09
FD
Disabled
Disabled