Installation Instructions
[] ATTACH THE FRESH FOOD
DOOR HANDLE
Stainless steel and plastic handles:
@ Attach the handle
to the handle
mounting fasteners
and tighten the set
screws with a 1/8"
Allen wrench.
Mounting
Fasteners
l.
[] ATTACH THE FREEZERDOOR HANDLE
Stainless steel and plastic handles:
@ Attach the handle firmly to the mounting
fasteners and tighten the set screws on
the bottom of the handle with a 1/8" Allen
wrench.
[] REMOVE THE REFRIGERATOR DOORS
[] Open the refrigerator doors,
[] Removethe two rectangular caps with a flat-head
screwdriver,
[] REMOVETHE REFRIGERATORDOORS(cont.)
[] Removethe three screwson top with a Phillips-head
screwdriver,
[] Disengagethe two electricalconnectors,
_Tt /./
[] To disconnect the water coupling, push in on the grag
colorof the coupling and pull out the tubing,
[] Removethe two grounding cableswith a Phillips-head
screwdriver,
[] Removethree 10 mm hex-head bolts (right and left),
i
-& CAUTION:When the bolts are removed, the
door may fall and cause personalinjurg and/or damage
to the door itself,
17
To Next Page
Loading...
