I stallti
I
structi
efrigerator
Profile Model 26
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
In Canada, call 1.800.561.3344 or Visit our Website at: www.geappliances.ca
BEFORE YOU BEGIN
Readtheseinstructionscompletelyand carefully.
• IMPORTANT- Sovetheseinstructionsfor locol
inspector's use.
• IMPORTANT-Observeoilgoverningcodesend
ordinonces.
• Note to Installer- Besure to leovethese instructions with
the Consumer.
• Note to Consumer- Keepthese instructions for future
reference.
Skilllevel- Instollotionof this opplionce requiresbosic
mechonicol skills.
• Completion time- Refrigerotor Instollotion 20 minutes
Woter Line Instollotion 30 minutes
Properinstollotion isthe responsibilitUof the instoller.
Product foilure due to improper instollotion isnot covered
under the Worront U.
PREPARATION
MOVING THE REFRIGERATOR INDOORS
Ifthe refrigerator will not fit through a doorwag,
the refrigerator door and freezer drawer can be removed.
• Toremove the refrigerotor door,seethe Installing
the Refrigeratorsection.
• Toremove thefreezer drower,see the Removing
the FreezerDrawer section.
WATER SUPPLYTO THE ICEMAKER AND DISPENSER
Ifthe refrigerotor hos on icemoker,it will hove to be
connected to o coldwoter line.A GEwoter supplUkit
(contoining tubing, shutoff volve, fittings end instructions)
isovoilobleot extro cost from uour deoler,bUvisiting our
Websiteot ge.corn (inConodoot www.geappliances.ca)
or from Portsend Accessories,800.626.2002(InConodo
1.888.261.3055).
TOOLS YOU MAY NEED
10mm SocketRatchet/Driver
AdjustableWrench
1/4" OuterDiameter
CompressionNut
andFerrule(sleeve)
Phillips-HeadScrewdriver
3/32", 1/8" and4 mm
AllenWrenches
1/8" Drill Bit and
Electricor HandDrill
Pencil
Pliers
Flat-HeadScrewdriver
TapeMeasure
1/4" Nut Driver
Level
24
To Next Page
Loading...
