PQMII POWER QUALITY METER – INSTRUCTION MANUAL 4–1
PQMII Power Quality Meter
Chapter 4: Software
Digital Energy
Multilin
Software
4.1 Introduction
4.1.1 Overview
Although setpoints can be manually entered using the front panel keys, it is far more
efficient and easier to use a computer to download values through the communications
port. The no-charge EnerVista PQMII Setup Software included with the PQMII makes this a
quick and convenient process. With the EnerVista PQMII Setup Software running on your
PC, it is possible to:
• Program and modify setpoints
• Load/save setpoint files from/to disk
• Read actual values and monitor status
• Perform waveform capture and log data
• Perform harmonic analysis
• Trigger trace memory
• Get help on any topic
The EnerVista PQMII Setup Software allows immediate access to all the features of the
PQMII through pull-down menus in the familiar Windows environment. The software can
also run without a PQMII connected. This allows you to edit and save setpoint files for later
use. If a PQMII is connected to a serial port on a computer and communication is enabled,
the PQMII can be programmed from the setpoint screens. In addition, measured values,
status and alarm messages can be displayed with the actual screens.
To Next Page
Loading...
