Inserting the door panels.
Read these instructions completely and carefully.
0 Insert the Freezer Panel and Fresh Food Panel.
Carefullypush the freezer panel in until it slides Ifyour model has a dispenser,this step only
intothe slot behind the door handle. Pushthe filler appliesto the fresh food panel and top freezer panel.
panel (requiredwith some door panels)in behind
the decorator panel. Repeatfor fresh food panel.
0 Insert the Bottom Freezer Panel (on dispenser models).
Carefullypush the panel in until it slides into the slot
behind the door handle. Pushthe filler panel (required
with some door panels)in behind the decorator panel.
Attach the Top Trim on the Freezer and Fresh Food Doors.
TheTopTrim can befound insidethe refrigerator door. Hand tighten only. Hake sure that the top of
compartment, each panel fits snugly behind the lip of the Top Trim.
With a T-20 Torxdriver,attach the TopTrim, usingtwo
screws on each Top Trim piece,to the top of each
DTrim Screws
s Trim
Cut-Out
SideTrim---------_
Panel
/,
Panel
Fresh
Food
Panel
t
SideTrim
22
To Next Page
Loading...
