Table 10: Gantry Controls
Number Icon Function Description
1 Start Scan
If you want to stand by the gantry and start the scan, you can
press Start Scan after you have confirmed the prescription and
the table has been moved to the start location. Once the tube
has reached the exposure speed, the button flashes green for
30 seconds and then times out. Press the Start Scan button
again to bring the system back to the ready to scan state.
2 Stop Scan
•
Stops the prep display and X-ray exposure.
•
Halts all gantry and table motions.
3 Cradle In Moves the cradle into the gantry.
4 Table Up Moves the table up.
5 Cradle Out
Moves the cradle out of the gantry.
Cradle In or Out can be used to move the patient to the scan
location after clicking confirm settings.
Cradle In or Out LED flashes for three minutes before it times
out.
6 Table Down Moves the table down.
7 Fast Speed
When pressed simultaneously with Table Up/Down or Cradle
In/Out, speeds up the movement.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 8 Equipment 173
To Next Page
Loading...
