Illustration 37: Batch screen — Rotate tab
Function Name Description
Prescription mode
•
Oblique
displays a set of lines to define the reformat planes.
•
Rotation
defines projection planes. The defined planes rotate 180°.
•
Loop
defines the first and last slices of your projection planes that can be set to any degree of
rotation.
The displayed values are those of the current protocol and can be modified. The text fields change de‐
pending on the mode you select (oblique, rotation or loop).
Copies Appears only if
Print
or
Print & Save
are selected as an Output mode. Enter a value in the text field.
Output Modes
•
Print allows filming of the projection images and makes the [Format] and [Reference Image] but‐
tons available. Select a film format and select the film that you want the reference image to ap‐
pear on.
•
Save creates a new series in the browser. The series type is determined from the
Film/Save Op‐
tions
screen. Note that if
Color Save
has been turned on from the
Film/Save Options
screen, the
projections will be saved as SSAVE images even if Rfmt is selected as the image type. Screen
saves cannot be filtered or measured.
•
Filmer Images drops all generated images into the filmer (AW only).
•
Print/Save allows for both filming the generated images and saving a new series to the browser.
•
Filmer Movie drops the generated images in the filmer as a movie to be exported as mpeg or avi
image type.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 16 Reformat 495
To Next Page
Loading...
