REVERSING THE DOOR SWING
(continued)
8
Before tightening the hinge screws, check the
gasket. Look at it from both sides to make sure it
contacts the cabinet evenly from top to bottom.
Push it in if necessary. Also check to insure the
door opens and closes without interference. If
necessary adjust the position of the bottom hinge.
Replace both leveling legs and tighten the hinge
screws.
Finished! Enjoy using your refrigerator.
Replace the two screws in the other side of the
case bottom.
Replace the bottom hinge on the same side as
the top door pin.
PUSH
To Next Page
Loading...
Need help?
General
