GE SEER 1000 - Add Technician or Reset Technician Password

Using the Apple iOS App
2067634-077 Revision B SEER™ 1000 59
3. Replace the default password by entering and confirming your
new password. (Your new password must be at least eight char-
acters long.)
4. Touch Set New Administrator Password.
The Technicians screen opens.
Add Technician or Reset Technician Password
Only the app administrator can create Technician IDs and reset pass-
words to the default password.
To create a new Technician ID:
1. Touch Add Technician.
2. Enter the Technician ID.
3. Touch Save.
4. Touch Logout to return to the Technician Login screen.
The first time the technician logs in, he/she will be required to set
up a new password. The default technician password is
20130114. Then the technician can begin to use the app.