GE Sievers 500 RL - Sample Flow Path; Analyzer Schematic (Shown with Standard Ios)

GE Analytical Instruments ©2010 42 of 226 DLM 74001-04 Rev. A
Chapter 2: System Description
Figure 1: Analyzer Schematic (Shown with Standard iOS)
A brief description of each major Analyzer component follows.
Sample Flow Path
The Sievers 500 RL On-Line TOC Analyzer is available in three primary configurations: with the Super iOS,
offering four vial ports and on-line monitoring; with the standard iOS, offering one vial port and on-line
monitoring; and with the Sample Inlet Block, offering on-line monitoring only.
Discrete samples can be measured by the Sievers 500 RL On-Line TOC Analyzer by inserting a filled 40 mL
sample vial into the iOS System. Continuous monitoring is accomplished by plumbing a sample line to the inlet