PROBLEM
“PROBE” APPEARS
ON DISPLAY
“RESET” APPEARS
ON DISPLAY
POSSIBLE CAUSE AND REMEDY
*
probe
has been forgotten or
not
seated properly in oven
wall
when
using
Temp
Cook/Hold
or
Auto Roast
finctions.
●
Power has been disrupted. Touch CLEAR/OFF
and
reset
clock.
Ml
these
th~
m
normal
with
your
mkrowave
oven:
Q
Steam or vapor escaping from
●
Dull,
thumping sound while
oven
c
Some
TV-Radio interference
around the door.
is operating.
might be
noticed
while
using
your
●
Light reflection around door or
●
-
mn
@t
ti
change
microwave oven.
It’s
similar to the
outer case. in blower sound
may
occur while
interference caused by other
small
o~rating
at
power levels other
appliances and does not indicate a
than high.
problem with
yauroven.
If you need more help.. call, toll free:
The GE Answer
Center@
800.626.2000
consumer information service
21
To Next Page
Loading...
