GE TONOPORT V - Firmware Loading Procedures; FW1.4 Preparation and Loading

Revision H TONOPORT V 7-1
2001589-023
7 Firmware Loading
Procedure for FW1.4
NOTE
To update older TONOPORT V units (HW1.2 and before), use firmware
version FW1.4.
7.1 Preparation
7.1.1 Settings for Hyperterminal under Windows 95/98SE/NT4.0/
2000 (in this example with Windows 95SE)
 Start Hypertrm.exe.
 Type in the name: TONOPORT V.
 Type in any Phone Number and click <OK>.
 Go to FILE -> PROPERTIES and make the same configurations as shown in the
pictures.
 Go to "Transfer" -> "Send Text File..." to transfer files to TONOPORT.