GE TONOPORT V - Loading Procedure

8-2 TONOPORT V Revision H
2001589-023
Firmware Loading Procedure for FW2.0: Loading Procedure
8.2 Loading Procedure
 Connect inactive TONOPORT to USB port via USB cable.
NOTE
After TONOPORT V has been switched on, updating can only be carried
out within the first 10 minutes. After 10 minutes TONOPORT V enters a
power down mode and can be reactivated by switching on and off.
 Click the “Start Update” button and follow the displayed prompts.
 Switch off TONOPORT V.
 Disconnect TONOPORT V from PC.
 Check the correct Firmware version on TONOPORT V and set the correct
language:
Step Action Diplay
1 Switch on TONOPORT
V
HH:MM (time)
2 Press “INFO” 5 times H 5
3 Press “START” 20 : 01
(20 = Version FW 2.0
01 = German language)
4 Press "INFO" to select
the correct language
(which was displayed at
Step 1 of the Loading
Procedure)
20 : 01 (German)
20 : 02 (English)
20 : 03 (French)
20 : 04 (Italian)
20 : 05 (Spanish)
5 Press "START" to save
the language setting
HH : MM (time