Begin a new exam
Venue 50 – Basic User Manual 3-7
Direction 5446729-100 English Rev. 7
Scanning a New Patient
When starting a new patient’s exam, ensure you do the
following:
1. Press Home. The patient screen is displayed.
2. Fill in patient information by means of the following:
a. Fill in the patient information manually.
b. Press Worklist to select the desired patient from
worklist server and press Select or Select EM. The
patient information will show on the home screen.
c. If the last patient exam does not end, press New
Patient and fill in the patient information manually.
3. Select the application from Preset Information (if not
automatically selected).
4. Press Scan to perform the exam.
5. Store data to patient files.
You may choose more applications for the same patient by
tapping Home-> Preset Information in live scanning mode.
Scanning without entering any patient data
To scan a patient without entering any patient data:
1. Press Scan to perform the exam and save images/videos.
2. Patient images/videos are stored in the storage device, refer
to ‘Image Storage’ on page 3-88.
To Next Page
Loading...
