OB Worksheet
Venue 50 – Basic User Manual 3-73
Direction 5446729-100 English Rev. 7
Multi gestational
Venue 50 allows you to measure and report multiple fetus
development. The system can report a maximum of three
fetuses.
To enter the number of fetuses
If more than one fetus is imaged during the exam, enter the
number of fetuses in the OB worksheet page.
When you start OB exam, the system automatically defaults to
Fetus #1, it can be changed to Fetus #2 or Fetus #3.
To identify each fetus
For measurements, calculations, and worksheet displays, the
system labels each fetus A, B or C.
To select a fetus
During measurements, to change between fetuses:
Select the desired fetus in OB worksheet page.
NOTE: After you change to the next fetus, any measurements you
make are recorded and reported to that fetus. If you have any
active measurement that is not completed when you change the
fetus, the system cancels the measurement.
To view multiple fetuses
Multiple gestation data is displayed on the OB report and graph.
To Next Page
Loading...
