Image Management
Venue 50 – Basic User Manual 3-89
Direction 5446729-100 English Rev. 7
Storing a Video clip
Video clips can be stored in MPEG format.
A Cine Loop is a sequence of images recorded over a certain
timeframe.
1. Go to Utility -> Settings -> Common, then choose Video in
Live Scan Save.
2. Select Save, then select Exit to enter into scan screen.
3. While scanning or playing back a cineloop, press the
Dataflow Button to save the video.
4. A processing box showing storing progress displays.
5. A message “Video saved successfully“ displays on the
screen.
WARNING
Imaging functions may be lost without warning. Develop
emergency procedures to prepare for such an occurrence.
CAUTION
Do not cut off system power supply during image/video storing
process.
To Next Page
Loading...
