Preparing for a Biopsy
Venue 50 – Basic User Manual 5-39
Direction 5446729-100 English Rev. 7
The Biopsy Procedure
1. Place coupling gel on the scanning surface of the probe/
sheath/biopsy guide assembly.
2. Activate the biopsy guidezone on the system by pressing
Guide. When using multi-angle guides, ensure that the
proper guidezone angle is displayed.
Figure 5-19. Biopsy multi-angle guides
WARNING
Biopsy procedures must only be performed on live images.
CAUTION
Before activating the Guide, please make sure to select
Interventional related preset first.
To Next Page
Loading...
