Replacement Procedures
8-8 Venue 50 – Basic Service Manual
5447566-100 English Rev. 7
Docking Station Desk Support Assy
Tools
• NA
Needed Manpower
• 1 person, 1 minute
Preparation
• Cut off the AC Power input.
Removal Procedure
Mounting Procedure
1. Install the new parts in the reversed order of removal.
Table 8-2: Removal Procedure for Docking Station Desk Support Assy
No. Steps Corresponding Graphic
1. Remove probe holders.
2. Push the trigger to the other side, then
use the other hand to take the Docking
module off track.
To Next Page
Loading...
